- 22.2V Li-ion battery
- 55 minute run time
- 0.5L dust container
- Brushless DC motor
- HEPA filtration
- 4.5 hour charge time
- Wall mounted charging dock
SurgePlus 2-in-1 Cordless Stick Vacuum Cleaner
The lightweight and stylish SURGEPLUS Cordless 2-in-1 Stick Cleaner offers superb cleaning performance with a run time of up to 55 minutes. The brushless DC motor provides higher performance than regular DC motors as well as being much more energy efficient. The motorised floorhead comes with LED lights to highlight those hard to reach areas, and the lightweight design at just 2.3kg makes manoeuvring around furniture a breeze.
The SURGEPLUS has a powerful 22.2V li-ion battery that takes just 4.5 hours to fully charge and is equipped with a 0.5 litre dust container complete with HEPA filter; helpful for allergy suffers as it removes any finer dust particles. Accessories include a 2-in-1 crevice tool for hard and soft surfaces and a turbo pet brush to help get rid of stubborn pet hair.
55 mins auto mode
Dual power settings
Light and manoeuvrable 2.3kg
Large 22.2V battery
Removable and easy-to-clean brush
Battery life indicator
4-5 hours charging time
Includes a turbo brush and 2-in-1 crevice tool
Wall mount with charger
Easy release dust container
Can be fully dissembled
Motorised floor head
Accessories include motorised floor head, 2-in-1 crevice tool (hard and soft surface) and turbo pet brush
|Clean time||55 mins auto mode|
|Country of origin||China|
|Dimensions (HxWxD)||110 x 25 x 28 cm|
|Filter Type||Hepa Filter|
|The suction is poor||The airflow adjustment switch is open||Close the airflow adjustment switch|
|An object is blocked||Check the hose, the handle and the floor head or attachment for blockages|
|Filters are not fitted properly or are blocked||Clean or replace the filter|
|Device does not work||The appliance is not properly plugged into the socket||Check that the plug had been inserted properly|
|The dust container does not attach||The parts of the dust container have not been secured correctly||Check that the dust container lid is correctly attached. Also check if the dust container base has been clipped into place|
|Battery is not charging||Long storage and lack of use||Replace the battery|
|Damaged battery||Replace the battery|
|Defective charger||Replace the charger|
|Flashing battery indicator and it won’t switch on||The vacuum cleaner is blocked||Check the hose, the handle and the floor head or attachment for blockages. Remove the blockage|
|The brush bar is jammed||Too much hair is caught around the brush bar||Follow ‘Cleaning the motorised floor head’ instructions|
Assembling the product
Assembling the Dust Container
Insert the main HEPA filter into the inner chamber by aligning the locking grooves with the slots. Twist to secure. Then insert the inner chamber into the dust container by aligning the locking grooves with the dust containers slots.
Attaching the Dust Container to the Body
To attach the assembled dust container to the vacuum cleaners body align the dust containers slot with the locking groove on the underside of the body. Click the dust container into place.
Attaching the Motorised Tube/Floor Head
Insert the motorised tube in the air intake opening. Push the motorised tube in until it locks in place.
Attach the motorised floor head to the telescopic tube. Push until it locks into place.
To disassemble, press the tube release button and pull out the tube.
Attaching the 2-in-1 Crevice Tool
Simply slot the attachment directly into the body of the vacuum cleaner.
This vacuum cleaner comes with two attachments designed for differing applications. The 2-in-1 crevice tool can be attached directly onto the body of the vacuum cleaner. Floor Head This is suitable for cleaning large areas. The motorised floor head is fitted with a removable brush so that cleaning is smooth and simple. The motorised floor head is fitted with LED lights to help identify dirt and debris in darker corners and under furniture. 2-in-1 Crevice Tool Use to access material stuck in hard-to-get place. Use without the bristles for soft surfaces, use with bristles for hard surfaces Turbo Brush A motorised attachment which allows for a more intense vacuum. Use when vacuuming hair and other stubborn material. Wall Mount Locate a free space on a wall which is close to a plug socket. Ensure that there sufficient room for the whole vacuum cleaner to be mounted. Drill two holes into the wall and insert the appropriate wall plugs. Then, using the screws provided, securely fix the wall mount to the wall.
When Vacuum Cleaning
To switch on the device press the ON/OFF button switch. To switch between the AUTO and MAX mode press the PLUS/MINUS button. The device will automatically start operating in AUTO mode. Approximate maximum battery run time: AUTO mode = 55 minutes MAX mode = 11 minutes If the appliance is blocked or the dust canister is too full, the battery indicator will flash. If this occurs, please undertake the appropriate maintenance.
After Vacuum Cleaning
Turn off the device when you have finished cleaning. To do this press the ON/OFF button switch. Before recharging make sure that the charger being used is the correct one. Try to recharge before the battery is flat, this will ensure the longevity of the product. To further ensure longevity, avoid recharging straight after the battery is flat. Allow for it to have a cool down period.
Emptying the Dust Container
Because of the transparent design, it is easy to see when the appliance needs to be cleaned or emptied. Switch off the vacuum cleaner and disconnect the plug from the mains. When doing this always pull using the plug and not the cable. Press the release button on the top of the dust container to release it. Take the dust container to a waste bin and release the clip at the base. Make sure to be over the bin when doing this.
Cleaning the Filter System
Ensure that the dust container has been disconnected from the body of the vacuum cleaner before opening the lid to access the filter system. The filter system should be cleaned regularly. It is advised to clean the filter as often as emptying the dust container. The filter material is soft and fine, so clean the filter gently. Only ever wash the filter with clean water and do not use soap or detergent; this is likely to destroy the filter.
Cleaning the Main Filter
The main HEPA filter and the cover should be cleaned regularly. It is advised to clean the filter as often as emptying the dust container. Switch off the vacuum cleaner and disconnect the plug from the mains. When doing this always pull using the plug and not the cable. When the dust container has been removed from the body, release the inner chamber. Remove the main HEPA filter by twisting and aligning the pins with the slots. Pull out to release.
Cleaning the Main HEPA Filter
We suggest tapping the main HEPA filter to remove most of the debris. It too can be cleaned with water but make sure it is totally dry before placing it back into the appliance.
Cleaning the Body
Switch off the vacuum cleaner and remove the battery. The body, the dust container and the filter chambers can be wiped with a damp cloth if required. Avoid any liquid from entering any of the vacuum cleaners openings. Do not use strong cleaning substances and do not use coarse objects like a scouring pad as this will damage the plastic surface. Only plug in the appliance once all elements are completely dry. Hair and fluff may gather on the wheels and on the base of the floor head. Ensure to remove this so to avoid the either becoming jammed.
Cleaning the Motorised Floor Head/Turbo Brush
To remove the brush bar slide the latch on the base of the motorised floor head to the left. Remove the brush bar by lifting it out from the cavity. To access the brush bar of the turbo brush, use a coin to turn the lock on the right hand side of the attachment. Then follow the same instructions outlined above.