Power (W): 2000
Bar Pressure: 3.4bar
Cord Length (m): 2.4
Heat Up Time (mins): 12
Hose Length (m): 1.7m
Steam Rate (g/mins): 80
Water Tank Capacity (L): 1.5
Onboard Tool Storage
Stainless Steel Tank
Double Insulated Hose
Safety Pressure Cap
STEAMDYNAMO+ 2000W Steam Cleaner & Sanitiser
Power (W): 2000
- Additional information
- Instruction Manual
- Reviews (0)
|Dimensions||29.5 × 34.5 × 54.1 cm|
|Bar Pressure||3.4 Bar|
|Heat Up Time||12 mins|
|Country of origin||China|
|Dimensions (HxWxD)||121.8 x 30 x 50 cm|
|Hose Length||1.7 metres|
2 x Extension Tubes,
Floor Head Brush,
Water Jug, Funnel,
|Water comes out of the Nozzle||The Steam Cleaner creates a large amount of steam. This may condense as water or water droplets in the Steam Hose and can be expelled when used after a period of cooling.
This is normal and not a cause for concern.
|No Steam comes out||Check that the hose has not become kinked or blocked- Also check the power supply and water level.|
|I can’t get the Pressure Cap off||Make sure that you have fully de-pressurized the Boiler. See the section refilling the water tank.|
|Steam flow is erratic; sometimes it works well, other times it does not||If you have not used distilled or deionized water, you may have a small blockage inside your Steam Cleaner. Try descaling your unit.
Check all attachments are fitted correctly.
|I live in a hard water area, my Steam Cleaner does not work as well||Empty the machine after use. In hard water areas your Steam Cleaner may benefit from occasional descaling. This can be done by using a kettle descale solution.
You can also use distilled or deionized water to extend the life of the product.
Download the Instruction Manual for STEAMDYNAMO+ 2000W Steam Cleaner & Sanitiser by clicking the pdf link below. If you have any issues or questions not answered by the instruction manual, please contact our customer support here.